Specifications

Peak power: 500W
Continuous power: 250W
LCD Display: Show input/output voltage,battery power, frequency,protection function and work status light
Input voltage: 12V
Output voltage: 220VAC/110V
Dual USB output: 5VDC/2.1A
No load current: ≤0.5A            
Conversion efficiency: greater than 90%
Protection: overload, over temperature, high pressure, low pressure, reverse connection and short circuit intelligent temperature control, less than 300W (except for the inductive load electrical appliances and electrical products)

General knowledge of use

1. Please try to use our standard battery cable, otherwise it will not have full power output!

2. Inverter power on: first turn on the power and then turn on the load. Shutdown: disconnect the load first and then shutdown.

3. It is strictly forbidden to access the mains to the output port, and forbidden to connect the battery in reverse with the load.

4. Do not overload with household appliances such as inverters with motors, pumps, air conditioners and other inductive loads, please multiply the rated power by at least 3 times, the resulting value must not exceed the inverter power.

5.If the inverter red light is on and there is a beeping sound, please check if it is overloaded and if the battery is full (whether your battery is new or not, please charge the battery for at least 3 hours and then try again).

6. When not using the inverter, please turn off the inverter switch.

7. When the inverter beeps, please make sure to disconnect the load first, turn off the inverter switch and then check the problem.

After Sales Service

Return service: If the received goods have quality problems or do not meet the description, the buyer can apply for return service.

Repair service: If there is a non-human caused failure of the goods, buyers can apply for repair service.

Cancellation of order: If buyers find that they do not need the goods after placing an order or want to cancel the order for other reasons, they can apply for cancellation of order.